How do I remove the windshield wiper switch?

Question

I have a 1993 Chevrolet S-10 2.8L 5-speed with a bad windshield wiper switch. I subscribe to ALLDATADIY.com and have used the information obtained there to remove the steering wheel, steering column lock, turn signal cam, lock cylinder and everything needed to get access to the windshield wiper switch. The steering column has no tilt wheel.
I know that particular switch has a rod that goes from it, down the outside of the steering column to the headlight bright & dim switch, I have a new replacement switch already but I just can't see how to remove the old one. I did proper troubleshooting to determine that the switch is bad and not the module on the wiper motor.
Even the information on the ALLDATA site is pretty vague and doesn't really say how to remove the switch.

Does anybody know how to remove this switch or know where I can find useful information to get this job done? I've asked nearly everybody I can think of except a Chevrolet dealer but they wouldn't tell me anyway for obvious reasons. They're in the business of fixing cars, not giving out free information. This one really has me stumped.
Thanks in advance for any helpful information.

Answer 1

We have recently uploaded some videos on our company website to give you first hand viewing of how to remove, disassemble, and reassemble the tilt column you are talking about. They are broken down into step by step 2-3 minute detailed videos with instructions. Although the videos are for a Chevrolet truck, the column is very similar to yours.



http://www.stolenandrecovered.com/video/index.php



I hope these videos help you. If not, please contact me again for more information.

Lastly, if you need parts to repair this column simply email us on our "Contact Us / Order Parts" page and we will get back in touch with you personally. We stock just about everything you would need to repair your car properly.



Good luck



Doug



http://www.stolenandrecovered.com

Answer 2

Windshield Wiper Switch Replacement

Answer 3

Many times they use special safety security screws to mount that type steering wheel switch assembly and the only way you can truly tell where these screws etc might be is by taking a close look at the assembly on the car and the replacement part look for mounting holes in the mold of the switch assembly.These screws will have special heads and unless you've got the correct factory tool you'll have to find either a socket or screwdriver that will remove them for you.Example if you've a saw with a head that is tiny and looks much like a square head but isn't a small flat head might remove it for you, and if the head has several edges like it's a standard nut but different you might be able to use a small deep socket.





Hope that helps and best of luck.By the way these type of screws an be not only on top but also from the side too and more then likely you've anywhere from 2 to 4 screws.

Answer 4

This Site Might Help You.



RE:

How do I remove the windshield wiper switch?

I have a 1993 Chevrolet S-10 2.8L 5-speed with a bad windshield wiper switch. I subscribe to ALLDATADIY.com and have used the information obtained there to remove the steering wheel, steering column lock, turn signal cam, lock cylinder and everything needed to get access to the windshield wiper...

Answer 5

Take a peek at the rod and where it is connected, and back trace it comes out just have to find the right spot. don't give up.